Mill - Canton Creek W/s Str. #10 Dam

About Mill - Canton Creek W/s Str. #10 Dam

The primary purpose of Mill - Canton Creek W/s Str. #10 Dam is flood risk reduction. The dam is designed to control downstream flooding by temporarily storing excess water during storms and releasing it at a controlled rate. The dam is owned by Limestone Valley S & Wcd (state). It impounds the Unknown near Hickory Flat (environs).

The dam stands 24 feet tall and stretches 435 feet across, creates a reservoir covering 12 acres, has a maximum storage capacity of 446 acre-feet, and collects water from a drainage area of 1,056 square miles. Completed in 1968, the structure is well into its service life at over 50 years old.

This dam carries a high hazard potential classification, which means that a failure or uncontrolled release of water would likely cause loss of human life. This classification reflects the consequences of failure, not the likelihood — it indicates that people live or work in the area downstream. Its condition is rated poor, meaning the dam has recognized safety deficiencies that require remediation to address risks. Notably, no emergency action plan is currently on file for this high-hazard dam. The most recent inspection on record was 05/01/2013. That was 12 years ago — unusually long for a high-hazard dam, which typically requires more frequent inspections.

Living Downstream

If you live or work downstream of this dam, consider taking these steps: learn your local evacuation routes, check whether your county emergency management office has a dam failure inundation map, and sign up for local emergency alerts. The Georgia dam safety program can provide more specific information about emergency planning for this structure.

Search for dams near your address to see all dams in your area with hazard classifications and safety data.