Jim Campbell Dam 2 is an earth dam located in Donley County, Texas, built in 1979. It carries a Low hazard potential classification.
Dam profile
NID height · 30 ft30 ft tall and 317 ft long, taller than 68% of U.S. dams with a recorded height. Height is drawn to scale against a two-story house, about 25 ft; the profile is a generic embankment section and the water level is illustrative.
About Jim Campbell Dam 2
Jim Campbell Dam 2 is a dam in Donley, Texas. The dam is owned by Jim Campbell (private). It impounds the Tr-washburn Arroyo near Canadian.
The dam stands 30 feet tall and stretches 317 feet across, has a maximum storage capacity of 70 acre-feet, and collects water from a drainage area of 1,076 square miles. Completed in 1979, the structure is 47 years old.
This dam has a low hazard potential classification, meaning that failure would cause minimal damage, limited primarily to the dam owner's property, with no expected loss of life.
Search for dams near your address to see all dams in your area with hazard classifications and safety data.
Location
| State | Texas |
| County | Donley |
| Nearest City | Canadian |
| River/Stream | Tr-washburn Arroyo |
| Coordinates | 35.00001, -100.58333 |
Physical Characteristics
| Dam Type | Earth |
| NID Height | 30 ft |
| Dam Height | 30 ft |
| Dam Length | 317 ft |
| Year Completed | 1979 (47 years old) |
Storage & Hydraulics
| NID Storage | 70 acre-ft |
| Max Storage | 70 acre-ft |
| Normal Storage | 11 acre-ft |
| Drainage Area | 1,076 sq mi |
| Spillway Type | None |
Ownership & Safety
| Purpose | Other |
| Owner | Jim Campbell |
| Owner Type | Private |
| Hazard Classification | Low |
| Condition Assessment | Not assessed |
| Emergency Action Plan | Not Required |
Identifiers
| NID ID | TX06793 |
| Federal ID | TX06793 |
| More Info | State Dam Safety Program |