Stillwater Landing Dam is an earth dam located in Wake County, North Carolina. It carries a Low hazard potential classification.
Dam profile
NID height · 30 ft30 ft tall and 200 ft long, taller than 68% of U.S. dams with a recorded height. Height is drawn to scale against a two-story house, about 25 ft; the profile is a generic embankment section and the water level is illustrative.
About Stillwater Landing Dam
The primary purpose of Stillwater Landing Dam is recreation. The dam creates a reservoir used for recreational activities such as fishing, boating, and swimming. It impounds the Lower Barton Creek near Falls.
The dam stands 30 feet tall and stretches 200 feet across, creates a reservoir covering 2 acres, and has a maximum storage capacity of 30 acre-feet.
This dam has a low hazard potential classification, meaning that failure would cause minimal damage, limited primarily to the dam owner's property, with no expected loss of life. The most recent inspection on record was 01/05/2023.
Search for dams near your address to see all dams in your area with hazard classifications and safety data.
Location
| State | North Carolina |
| County | Wake |
| Nearest City | Falls |
| River/Stream | Lower Barton Creek |
| Coordinates | 35.91600, -78.69470 |
Physical Characteristics
| Dam Type | Earth |
| NID Height | 30 ft |
| Dam Length | 200 ft |
Storage & Hydraulics
| NID Storage | 30 acre-ft |
| Max Storage | 30 acre-ft |
| Normal Storage | 20 acre-ft |
| Surface Area | 2 acres |
Ownership & Safety
| Purpose | Recreation |
| Owner Type | Not Listed |
| Hazard Classification | Low |
| Condition Assessment | Not assessed |
| Last Inspection | 01/05/2023 |
| Emergency Action Plan | No |
Identifiers
| NID ID | NC04461 |
| Federal ID | NC04461 |
| More Info | State Dam Safety Program |