Tilley Dam is an earth dam located in Stokes County, North Carolina. It carries a Low hazard potential classification.
Dam profile
NID height · 27 ft27 ft tall and 175 ft long, taller than 59% of U.S. dams with a recorded height. Height is drawn to scale against a two-story house, about 25 ft; the profile is a generic embankment section and the water level is illustrative.
About Tilley Dam
The primary purpose of Tilley Dam is recreation. The dam creates a reservoir used for recreational activities such as fishing, boating, and swimming. The dam is owned by Bruce V Tilley (private). It impounds the Ut to Big Creek near Danbury.
The dam stands 27 feet tall and stretches 175 feet across, creates a reservoir covering 1 acres, has a maximum storage capacity of 17 acre-feet, and collects water from a drainage area of 0 square miles.
This dam has a low hazard potential classification, meaning that failure would cause minimal damage, limited primarily to the dam owner's property, with no expected loss of life. The most recent inspection on record was 01/17/2025.
Search for dams near your address to see all dams in your area with hazard classifications and safety data.
Location
| State | North Carolina |
| County | Stokes |
| Nearest City | Danbury |
| River/Stream | Ut to Big Creek |
| Coordinates | 36.49920, -80.43970 |
Physical Characteristics
| Dam Type | Earth |
| NID Height | 27 ft |
| Dam Length | 175 ft |
Storage & Hydraulics
| NID Storage | 17 acre-ft |
| Max Storage | 17 acre-ft |
| Normal Storage | 9 acre-ft |
| Surface Area | 1 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 1,625 cfs |
| Spillway Type | None |
Ownership & Safety
| Purpose | Recreation |
| Owner | Bruce V Tilley |
| Owner Type | Private |
| Hazard Classification | Low |
| Condition Assessment | Not assessed |
| Last Inspection | 01/17/2025 |
| Emergency Action Plan | No |
Identifiers
| NID ID | NC04218 |
| Federal ID | NC04218 |
| More Info | State Dam Safety Program |