Brea Dam - Saddle Dike 1

About Brea Dam - Saddle Dike 1

The primary purpose of Brea Dam - Saddle Dike 1 is flood risk reduction. The dam is designed to control downstream flooding by temporarily storing excess water during storms and releasing it at a controlled rate. The dam is owned by Usace - Los Angeles District (federal). It impounds the Brea Creek near Fullerton.

The dam stands 87 feet tall and stretches 1,765 feet across, creates a reservoir covering 1 acres, has a maximum storage capacity of 7,420 acre-feet, and collects water from a drainage area of 22 square miles. Completed in 1942, the structure is well-established, with more than 75 years of service.

This dam carries a high hazard potential classification, which means that a failure or uncontrolled release of water would likely cause loss of human life. This classification reflects the consequences of failure, not the likelihood — it indicates that people live or work in the area downstream. An emergency action plan is in place for this dam. The most recent inspection on record was 11/14/2018. That was 7 years ago, which is on the longer end for a high-hazard structure.

At 87 feet, this dam is taller than 97% of all dams in the United States.

Living Downstream

If you live or work downstream of this dam, consider taking these steps: learn your local evacuation routes, check whether your county emergency management office has a dam failure inundation map, and sign up for local emergency alerts. The California dam safety program can provide more specific information about emergency planning for this structure.

Search for dams near your address to see all dams in your area with hazard classifications and safety data.