Cliffside Active Ash Basin Downstream Dam

About Cliffside Active Ash Basin Downstream Dam

The primary purpose of Cliffside Active Ash Basin Downstream Dam is tailings. Tailings dams contain waste material from mining operations — typically a slurry of finely ground rock left over after valuable minerals have been extracted. These structures require ongoing monitoring because tailings can contain heavy metals and other contaminants. The dam is owned by Duke Energy Corporation (public utility). It impounds the Suck Creek.

The dam stands 120 feet tall and stretches 876 feet across, creates a reservoir covering 86 acres, has a maximum storage capacity of 1,843 acre-feet, and collects water from a drainage area of 0 square miles. Completed in 1972, the structure is well into its service life at over 50 years old.

This dam carries a high hazard potential classification, which means that a failure or uncontrolled release of water would likely cause loss of human life. This classification reflects the consequences of failure, not the likelihood — it indicates that people live or work in the area downstream. Its condition is rated satisfactory, indicating no existing or potential dam safety deficiencies are recognized. An emergency action plan is in place for this dam. The most recent inspection on record was 09/19/2024.

At 120 feet, this dam is taller than 98% of all dams in the United States.

Living Downstream

If you live or work downstream of this dam, consider taking these steps: learn your local evacuation routes, check whether your county emergency management office has a dam failure inundation map, and sign up for local emergency alerts. The North Carolina dam safety program can provide more specific information about emergency planning for this structure.

Search for dams near your address to see all dams in your area with hazard classifications and safety data.